fouad.erchiqui

Articles de revue

Erchiqui F. (2018), Application of genetic and simulated annealing algorithms for optimization of infrared heating stage in thermoforming process. Applied Thermal Engineering, (128): 1263-1272

H. Farid*, A. Saeidi, M. Farzaneh, F. Erchiqui. (2018). An atmospheric ice empirical failure criterion. Cold Regions Science and Technology. 146: 81–86.Article publié, Elsevier,

Tazi* M., Erchiqui F., Kaddami H.(2018). Influence of softwood-fillers content on the biodegradability and morphological properties of wood-polyethylene composites. Polymer Composites. 39: 29-37. Article publié, Wiley,

K. Ben Hamou; Kaddami H.; Dusfrene A.; Boufi S.; Erchiqui F.(2018). Impact of TEMPO-Oxidization Strength on the Properties of Cellulose Nanofibril Reinforced Polyvinyl Acetate Matrix Carbohydrate Polymers. Carbohydrate Polymers. 181: 1061-1070, Article publié, Elsevier,

Toubal L; Bravo* A.; Koffi D.; Erchiqui. (2017). Gear fatigue life and thermomechanical behavior of novel green and bio-composite materials VS high-performance thermoplastics. Polymer Testing, en ligne: http://www.sciencedirect.com/science/article/pii/S0142941816308686

Baatti * A., Erchiqui F., Bébin P.; Godard F., Bussieres D.(2017). A two-step Sol-Gel method to synthesize a ladder polymethylsilsesquioxane nanoparticles. Advanced Powder Technology. 28: 1038-1046.

Sukiman* M. S.; Nguyen F.; Imad. A; El Moumen A.: Erchiqui E.(2017). Effective thermal and mechanical properties of randomly oriented short and long fiber composites. Mechanics of Materials. 107: 56–70.

Farid H*, Farzaneh M., Saeidi A., Erchiqui F.(2016). A contribution to the study of the compressive behavior of atmospheric ice. Cold Regions Science and Technology, 121: 60-65.

Bravo* A.; Toubal L., Koffi D.; Erchiqui F.(2016). Optimized use of cooling holes to decrease the amountof thermal damage on a plastic gear tooth. Advances in Mechanical Engineering. 8(5): 1-13

Fotso Talla* A. S., Erchiqui F., Godard F., Kocaefe D. (2016). An evaluation of the thermal degradation kinetics of novel melt processed PET-Hemp fiber composites. Journal of Thermal Analysis and Calorimetry.126(3): 1387-1396

Tazi* M, Sukiman* S. M; Erchiqui F., Imad A.; Kanit T. (2016). Effet of wood fillers on the vioscoelastic and thermophysical properties of HDPE-Woodcomposite. International Journal of Polymer Sciences: http://dx.doi.org/10.1155/2016/9032525

Erchiqui F., Fotso Talla* A. S, Kaddami H.(2016). A Numerical Investigation of the Use of Novel Melt Processed PET-Hemp Fiber Composites for Thermoforming Applications. Polymer Engineering & Science 56(9): 1021-1030

Fini* S. H. A., Farzaneh M., Erchiqui F.(2015). Investigating the hyperelastic behaviour of wood-plastic composites at cold temperatures with artificial neural networks application. Wood Science and Technology. 49(4): 695-705.

Bravo* A., Toubal L., Koffi D., Erchiqui F.(2015). Polyethylene based bio and green comparisons under creep and cyclic testing damaging comparisons using acoustic emission. Materials. 8: 7322-7341.

Bravo* A.; Toubal L.; Koffi D.; Erchiqui F. (2015). Life and damage mode modeling applied to plastic gears. Engineering Failure Analysis. 58: 113-133.

Fini Akbari* S. H., Erchiqui F., Farzaneh M. (2015). Investigating the elastic deformation of wood-plastic composites at cold temperature using the bubble inflation technique. Journal of Thermoplastic Composite Materials. 28(3): 431-441.

Erchiqui F.; Souli M.; Kanit T. Imad A.; El Moumen A.(2015). Characterization of polymeric membrane under large deformations using fluid-structure coupling. International Journal of Applied Mechanics. 7(5): 1-18

Talla* A. F. S., Erchiqui F. (2015). An evaluation of the thermal degradation kinetics of novel melt processed PET-Hemp fiber composites. Polymer Degradation and Stability. 126(3): 1387-1396

Mijiyawa* F., Koffi D., Kokta B. V., Erchiqui F. (2015). Formulation and tensile characterization of wood– plastic composites:Polypropylene reinforced bybirch and aspen fibers for gear applications. Journal of Thermoplastic Composite Materials. 28: 1675-1692.

Bravo* A., Toubal L., Koffi D., Erchiqui F.(2015). Development of new green and bio composite materials: tensile, flexural properties and damaging analysis with fuzzy logic using acoustic emission. Material & Design. 66(Part A): 16-28.

Fotso Talla* A. S., Erchiqui F.; Kaddami H., Kocaefe D.(2015). Investigation of the thermostability of PET- Hemp Fiber composites: Extending natural fiber reinforcement to High-melting thermoplastics. Journal of Applied Polymer Science. 132(37)

Erchiqui F., Annasabi Z*. Souli M, Slaoui-Hasnaoui F.(2015). 3D numerical analysis of the thermal effect and dielectric anisotropy on thawing frozen wood using microwave energy . International Journal of Thermal Sciences. 89: 58-78.

Farid* H.; Erchiqui F.; ElghorbaM.; Ezzaidi H.(2014). Neural networks approach for hyperelastic behavior characterization of ABS under uniaxial solicitation. British Journal of Mathematics & Computer Science. 4(32): 4480-4493.

Talla* A. F. S.; Erchiqui F.; Kocaefe, D.; Kaddami H.(2014). Effect of Hemp Fiber on PET/Hemp Composites. Journal of Renewable Materials. 2(4): 285-290.

Tazi* M., Erchiqui F., Godard F., Kaddami H., Ajji A.(2014). Characterization of rheological and thermophysical properties of HDPE-Wood composite. Journal of Applied Polymer Science. 131(13)

Erchiqui F.(2014). Analysis and evaluation of power formulations for wood and hardboard using radiofrequency and microwave energy. Drying Technology. 32(8): 946–959.

Erchiqui F., Souli M. (2014). Investigation on the application of 3D variational indirect BEM method for acoustic radiation pressure produced by vertical-axis wind turbine. International Journal of Multiphysics. 8(4): 421-436.

Tazi* M., Erchiqui F., Godard F., Kaddami K.(2014). Evaluation of Mechanical Properties and Durability Performance of HDPE-Wood Composites. Journal of Renewable Materials. 2(4): 467-502.

Erchiqui F.; Annasabi* Z.; Koubaa A.; Kocaefe D.; Slaoui-Hasnaoui F., Imad A.(2014). Numerical Investigation on Phytosanitary Treatment of Frozen Wood using Microwave Energy. The Canadian Journal of Chemical Engineering. 92(11): 1859–1864.

Bravo* A., Toubal L., Koffi D., Erchiqui F.(2013). Characterization of Tensile Damage for a Short Birch Fiber-Reinforced Polyethylene Composite with Acoustic Emission. International Journal of Material Science. 3(3): 79-89.

Fotso Talla* A. S., Mfoumou E., Jeson S., Pagé JSYD, Erchiqui F. (2013). Mechanical and structural properties of a novel melt processed PET–hemp composite: Influence of additives and fibers concentration. Journal of Reinforced Plastics and Composites,. 32(20): 1526-1533.

Al-Bahkali E. A., Erchiqui F., Moatamedi M., Souli M. (2013). Deployment of a Neo-Hookean Membrane: Experimental and Numerical Analysis. International Journal of Multiphysics. 7(13): 41-51.

Erchiqui F.(2013). Analysis of Power formulations for Numerical Thawing Frozen Wood Using Microwave Energy. Chemical Engineering Science. 98: 317–330.

Erchiqui F., Annasabi* Z., A. Koubaa, F. Slaoui Hasnaoui F.(2013). Numerical Modeling of Microwave Heating of Frozen Wood. The Canadian Journal of Chemical Engineering. 9: 1582-1589.

Erchiqui F.(2013). 3D Numerical Simulation of Thawing Frozen Wood Using Microwave Energy: Frequency Effect on the Applicability of the Beer-Lambert Law. Drying Technology. 31(11): 1219-1233.

Farid* H.; Elgorba M.; Erchiqui F.; M. Chergui; K. Elhad,. (2013). Damage Characterization of a thin plate Made of ABS under uniaxial solicitation. International Journal of Engineering and Science. 2(8): 11-17.

Foudil-bey* N; Royer J. J; Cheng L.; Erchiqui F.; Mareschal J. C. (2013). Neural Network Stochastic Simulation Applied for Quantifying Uncertainties. International Journal of Multiphysics. 7(1): 31-40.

Farid* H.; Elghorba M.; Elhadl K.; Erchiqui F.; Chergui M.(2013). Damageable thermal behavior of a thermoplastic flat plate under uniaxial stress. The British journal of mathematics & computer science. 3(4): 527-538.

Slaoui F. H., Georges S., Erchiqui F.(2012). Soil Parameters Estimation in a Vertical N-Layer Structure Using the Inversion Method. Journal of Electrical and Control Engineering. 2(4): 13-19.

Soroush* H. A., Erchiqui F., Farzaneh M. (2012). Neural networks approach for characterization of non- isothermal thermoplastic membrane. Procedia Engineering. 44: 1291-1292.

Amdi* M., Souli M., Hargreaves J., Erchiqui F.(2012). Numerical investigations of vibroacoustic analysis with different formulations. Computer Modeling in Engineering and Science. 85(4): 329-346.

Ben Mabrouk*; Kaddami H.; Bouffi S.; Erchiqui F.; Dufresne A.(2012). Nanosized nanofiller from alfa fibers (Stipa tenacissima) : extraction procedures and reinforcement potential in polymer composites. Cellulose. 19(3): 843-853.

Erchiqui F.; Nahas* N., Nourelfath M.; Souli M.(2011). A metaheuristic algorithms for optimization of infrared heating stage of the thermoforming process. International Journal of Metaheuristics. 1(3): 199-221. Auteur principal

Tazi* M., Erchiqui F. and Godard F., Imad A. (2011). Effet de la température sur les propriétés rhéologiques et physico-chimiques des composites plastique-bois. Revue de Mécanique appliqué et théorique. 2(5): 557-572.

Gakwaya A.; Sharifi* H.; Souli M.; Erchiqui F.(2011). ALE formulation and simulation techniques in Integrated Computer Aided Design and Engineering System with industrial metal forming applications. Computer Modeling in Engineering and Sciences. 73(3): 209-266.

Souli M.; Erchiqui F.(2011). Experimental and Numerical Investigation of Instructions for Hyperelastic Membrane Inflation Using Fluid Structure Coupling. Computer Modeling in Engineering and Sciences. 77(3): 183-200.

Migneault* S., Koubaa A., Erchiqui F., Chaala A., Englund K., Wolcott, M. P. (2011). Application of micromechanical models to tensile properties of wood-plastic composite. Wood Science and Technology. 45(3): 521-532.

Erchiqui F.; Ozdemir* Z.; M. Souli; Ezaidi H.; Dituba-Ngoma G.(2011). Neuronal networks approach for characterization of viscoelastic polymers. The Canadian Journal of Chemical Engineering. 89(5): 1303-1310.

Erchiqui F; A. Imad; A. Mouloudi* A., Hasnaoui-Slaoui F.(2010). Caractérisation viscoélastique du comportement d’une membrane thermoplastique et modélisation numérique de thermoformage. The Canadian Journal of Chemical Engineering. 88(1): 116-125.

Hasnaoui-Slaoui F.; Erchiqui F.(2010). Evaluation of Grounding and inversion method to estimate soil electrical grounding parameters. International Journal of Multiphysics. 4(3): 201-215.

Erchiqui F. ; Souli M.(2009). Numerical Investigation of the gas flow temperature on the Thermoforming and Blow-Moulding Processes. Journal of Reinforced Plastics and Composites. 28(15): 1823-1840.

Erchiqui F.; Hamani* I.; Charette, A.(2009). Modélisation du chauffage infrarouge des membranes thermoplastiques semi-transparentes par la méthode des éléments finis. International Journal of Thermal Sciences. 28: 73-84.

Erchiqui F.; F. Godard; A. Koubba; Kaddami H.(2009). Investigation of relaxation properties and potentiality of the thermoformability of HDPE charged by wood fibers. Journal of Reinforced Plastics and Composites. 28(10): 1153-1168.

Migneault* S.; Koubaa A.; Erchiqui F.; Chaala A.; Englund K.; Wolcott M. P.(2009). Effect of processing method and fiber size on microstructure and properties of wood-plastic composites. Composites Part A. 40: 80-85.

Ben Yedder R.; Erchiqui F. (2009). Convective flow and heat transfer in a tall porous cavity side-cooled with temperature profile. International Journal of Heat and Mass Transfer. 52: 5712-5718.

Erchiqui F.; Godard F.; Gakwaya A.; Koubaa A.; Vincent M.; Kaddami H.(2009). Engineering Investigation of Potentiality of the Thermoformability of HDPE charged by wood flours in the thermoforming part. Polymer Engineering & Science. 49(8): 1594-1602.

Sbiai* A.; Kaddami H.; Fleury E.; Maazouz A.; Erchiqui F.; Koubaa A.; Soucy* J; Dufresne A.(2008). Effect of the Fiber Size on the Physicochemical and Mechanical Properties of Composites of Epoxy and Date Palm Tree Fibers. Macromolecular Materials and Engineering. 293: 684-691.

Migneault* S., Koubaa A., Erchiqui F., Chaala. (2008). Effect of Fiber Length on Processing and Properties of Extruded Wood-Fiber/HDPE Composites. Journal of Applied Polymer. 110: 1085-1092.

Erchiqui F.(2008). Numerical investigation of gas equations of state of the isotropic viscoelastic polymer membrane in free and confined inflation. Journal of Reinforced Plastics and Composites. 27(5): 487-505..

Bendahou* A., Kaddami H., Sautereau H., Raihane M., Erchiqui F. and Alain Dufresne A.(2008). Short palm tree fibers polyolefin composites: effect of filler content and coupling agent on physical properties. Macromolecular Materials and Engineering. 293(2): 140-148.

Erchiqui F., Dituba N. G. (2007). Analyse comparative des méthodes de calcul des facteurs de formes pour des surfaces à contours rectilignes. International Journal of Thermal Sciences. 46: 284-293.

Erchiqui F., Bendada A.(2007). Application of the thermodynamical law of gases for modelling of free inflation of the closed thin hyperelastic structure. International Journal of Modelling and Simulation. 27(3): 258-265.

Erchiqui F., Souli M., Ben Yedder R.(2007). Non-isothermal Finite Element Analysis of Thermoforming of Polyethylene Terephthalate Sheet: effect of incomplete forming. Polymer Engineering & Science. 47(2): 2129-2144.

Dituba N. G., Erchiqui F. (2007). Heat flux and slip effects on liquid flow in microchannel. International Journal of Thermal Sciences. 46: 1076-1083.

Erchiqui F.(2006). A new thermodynamical approach for the simulation of thermoforming process using the quasi-static finite element method. Journal of Reinforced Plastics and Composites. 25(3): 235-265.

Erchiqui F. (2006). A new hybrid approach using the explicit dynamic finite element method and thermodynamic law for the analysis of the thermoforming and blow molding processes for polymer materials. Polymer Engineering & Science. 46(11): 1554-1564.

Erchiqui F.; N. Kandil. (2006). Neuronal Networks Application for Characterization of Softened Polymers. Journal of Reinforced Plastics and Composites. 25(5): 463-473.

Alia* A., M. Souli and Erchiqui F.(2006). Variational boundary element acoustic modelling over mixed quadrilateral-triangular element meshes. Communications in Numerical Methods in Engineering. 22(7): 767-780.

Nguma G. D.; Erchiqui F. (2006). Pressure gradient and electroosmotic effects on two immiscible fluids in micromechanical between two parallel plates. Journal of Micromechanics and Micro-engineering. 16: 83-91.

Erchiqui F. and N. Kandil. (2005). Artificial Neural Networks to Characterize ABS, HIPS. Thermoforming Quarterly. 24(1): 10-15.

Erchiqui F., Bendada A., Gakwaya A.(2005). Analysis of long fibers direction of transversely isotropic hyperelastic material for thermoforming. Journal of Reinforced Plastics and Composites. 24(9): 961-975.

Erchiqui F., A. Derdouri. (2005). Analyse expérimentale et numérique du comportement de membranes thermoplastiques en ABS et HIPS. The Canadian Journal of Chemical Engineering. 8(3): 527-536.

Bendada A.; Erchiqui F.; Lamontagne M.(2005). Pulsed thermography in the evaluation of an aircraft composite using 3D thermal quadrupoles and mathematical perturbations. Inverse Problems. 21(3): 857-877.

Erchiqui F., Diri D., Bouoyoun M., Bendada A.(2005). Analysis of gas pressure effect during the thermoplastic membrane blowing using the dynamic finite element method. International Journal of Forming Processes. 8(4): 429-450.

Erchiqui F. Gakwaya A., Rachik M.(2005). Dynamic finite element analysis of nonlinear isotropic hyperelastic and viscoelastic materials for thermoforming applications. Polymer Engineering & Science. 45(1): 125-134.

Bendada A.; Erchiqui F.; Kipping* A.(2005). Understanding heat transfer mechanisms during the cooling phase of blow moulding using infrared thermography. NDT & E International. 38: 433-441.

Erchiqui F.(2005). Finite element analysis of transversely isotropic viscoelastic material for thermoforming process. Journal of Reinforced Plastics and Composites. 24(12): 1229-1246.

Erchiqui F.(2005). Thermodynamical approach of inflation process of K-BKZ polymer sheet with respect to thermoforming. Polymer Engineering & Science. 45(10): 1319-1335.

Erchiqui F., Godard F., Ben Yedder R.(2004). Hybrid approach for modeling of parison formation in blow moulding process. Journal of Polymer Engineering. 24(6): 537-555.

Erchiqui F. and A. Gakwaya. (2003). Modélisation du comportement viscoélastique d’une membrane viscoélastique par la méthode des éléments finis. Revue Européenne des Éléments Finis. 12(1): . 45-58.

Erchiqui F., Gakwaya A.(2003). Modélisation du comportement viscoélastique d’une membrane viscoélastique par la méthode des éléments finis. European Journal of Computational Mechanics. 12(1): 43-58.

Erchiqui F., Diri* D.(2003). Modélisation du comportement des polymères thermoplastiques par une approche combinant la méthode dynamique des éléments finis et la loi des gaz parfaits. Revue des Composites et des Matériaux Avancés. 3(1): 99-114.

Erchiqui F., Derdouri A., Gakwaya G., Verron E.(2001). Free inflation of flat thermoplastic membrane: numerical analysis and experimental validation. Entropie. 235/236: 118-125.

Laroche D., Erchiqui F.(2000). Experimental and theoretical study of the thermoformability of industrial polymers. Journal of Reinforced Plastics and Composites. 19(3): 231-239.

Laroche D., Erchiqui F.(1999). Experimental and theoretical study of the thermoformability of industrial polymers. Journal of plastic, film and sheeting. 15(4): 287-296.

Charette A., Erchiqui F., Kocaefe Y.S.(1989). The imaginary planes method for the calculation of radiative heat transfer in industrial furnaces. The Canadian Journal of Chemical Engineering. 67(3): 378-384.

Articles de conférence avec comité de lecture

Baatti* A., Erchiqui F.; Bébin P.; Godard F.; Bussières D. (août 2017). Effect of surface modification of cellulose nanocrystals on mechanical properties of thermoplastic-based nanocomposites. International Conference on Structural Integrity and Durability 2017, Dubrovnik, Croatia.

Bachir Cherif* K.; Rebaine J.; Erchiqui F., Fofana I. (Juillet 2017). Metaheuristics for the infrared heating in the thermoforming process: A comparison study. 21 st Conference on international federation of Operational Research Societies (IFORS), Québec, Canada,

La Rocher-Carrier* N.; Dituba Ngoma G.; Erchiqui F., Hamani I. (Juillet 2017). Study of three Immiscible Fluids in a Microchannel Accounting for the Pressure Gradient and the Electroosmotic flow. 7th International Conference on Simulation and Modeling Methodologies, Technologies and Applications, Madrid, Espagne.

Rebaine D.; Bachir Cherif* K; Erchiqui F.; Fofana I. (juin 2017). Heuristic approach to distribute the infrared heating in the thermoforming process. Colloque: New and Smart Information and Communication Science and Technology (NICST'2017), Clermont Ferrand, France, Date de la conference:

Sukiman* S. M.; Kanit T.; Imad A.; Erchiqui F. (Avril 2017). Effective properties of randomly oriented short and long fiber cases.13ème Congrès de mécanique, Meknès, Maroc.

Baatti* A.; Erchiqui F.; Bébin P.; Godard F.; Bussières D. Mars (Mars 2017). A Two-Step Sol-Gel method to synthesize ladder polymethylsilsesquioxane nanoparticles. 4th International conference on biobased Materials and composites, Nantes, Francc

Hamani* I.; Erchiqui F.; Dituba-Ngoma G. (Mars 2017). Infrared heating modeling of the PET-Hemp fiber composites sheets in thermoforming process. 4th International conference on biobased Materials and composites, Nantes, France.

Fotso-Talla* A. S.; Erchiqui F.; Kaddami H. (Mars 2017). Poly(ethylene-Terephthalate) Reinforced with hemp fibers: elaboration, characterization and potential application in thermoforming process. 4th International conference on biobased Materials and composites, Nantes, France.

Baatti* A.; Erchiqui F.; Bébinc P.; Godard F.; Kaddami H. (Mars 2017). Thermomechanical behavior of polymethylsilsequioxane nanoparticles reinforced HDPE Nanocomposite. 4th International conference on biobased Materials and composites, Nantes, France.

Sukiman* M. S.; Kanit T.; Imad A.; Erchiqui F. (Mars 2017). Effective thermal and mechanical properties of randomly oriented short and long fibre composites. 4th International conference on biobased Materials and composites, Nantes, France.

Baattia* A., Erchiqui F.; Bébin P.; Godard F.; Bussières D. (Mars 2017). A two-step Sol-Gel method to synthesize a ladder polymethylsilsesquioxane nano-particles and Composites. International Conference of Biobased Materials, Nantes, France.

Baatti A*.; Erchiqui, F.; Bébin, P.; Godard, F.; Bussières, D. (Septembre 2016). Thermo mechanical behavior of Polymethylsilsesquioxane-HDPE nanocomposites. 19th International Conference on Composite Structures (ICCS19), Porto, Portugal.

Hamani* I., Erchiqui F., Dituba-Ngoma G.; Imad A. (Mars 2016). Numerical modeling of infrared heating step for thermoforming PET-Hemp biocomposites. 19th International Conference on Composite Structures (ICCS19), Porto, Portugal.

Baatti*, A.; Erchiqui, F.; Bébin, P.; Godard, F.; Bussières, D. (Septembre 2016). Thermomechanical behavior of Polymethylsilsesquioxane-HDPE nanocomposite. 19th International Conference on Composite Structures (ICCS19), Porto, Portugal.

Hamani* I., Erchiqui F., Imad A., Slaoui-Hasnaoui F. (Mai 2016). Modélisation numérique de l'étape de chauffage infrarouge en thermoformage des biocomposites PET-Chanvre. The International congress for applied mechanics, Hammamet, Tunisie.

Bachir Cherif* K, Rebaine D., Erchiqui F., Fofana I. (Mars 2016). Metaheuristics as a solving approach for the infrared heating in the thermoforming process. 30th conference of the Belgian Operational Research Society, CORE, Louvain-la-Neuve, Belgium

Rebaine D; Bachir Cherif* K; Erchiqui F.; Fofana I. (Juillet 2015). Migrating Bird Optimization Approach for the Infrared Heating Problem in Thermoforming. 27th European conference on operational research, Glasgow, Royaume-Uni.

Sukiman* S.; El Moumen A.; Kanit T.; Imad A.; Erchiqui F. (Juilet 2015). Random composites without deterministic representative volume element. International conference on mechanics of complex solids and fluids, Lille, France,

Farid* H, Farzaneh M, Saeidi A, Erchiqui F. (Juin 2015). Neural network approach to characterize the atmospheric ice compressive strength. 16 th International Workshop on Atmospheric Icing of Structures (IWAIS 2015), Uppsala, Suede,

Sukiman* S., El Moumen A., Kanit T., Imad A., Erchiqui F. (Juin 2015). Effective properties of composites with long fibres. 18th International conference on composite structures, Lisbon, Portugal.

Sukiman* S.; El Moumen A.; Kanit T.; Imad A.; Erchiqui F. (Mai 2015). Random composites without deterministic representative volume element. International Conference on Mechanics of Complex Solids and Fluids, Lille, France.

Tazi* M., Erchiqui F., Godard F., Bouazara M, Poaty B. (Novembre 2014). Effet du bois sur la biodégradabilité et la stabilité géométrique des composites PEHD-bois. Proceeding. The International congress for applied mechanics, JET'14, Marrakech, Maroc (AF3M, Association Franco-Maghrébine de mécanique), Maroc.

Farid* H., Ezzaidi H., Erchiqui F., Elghorba M., Elhad K, Slaoui-Hasnaoui F.(2014). Damage Characterization of a thin plate made of ABS under uniaxial solicitation. 19th International Conference on Composite Materials (ICCM-19), Montréal, Date de la conférence: 2014/7

Tazi* M., Erchiqui F., Kaddami H., Bouazara M., Poaty B. (Juin 2014). Evaluation of mechanical properties and durability performance of HDPE-Wood composites. Proceedings of the Polymer Processing Society. 30 International conference of the polymer society (PPS-30), Cleveland, USA.

Erchiqui F.; Rebaine D.; Nahas* N, Bachir Cherif* K.; Slaoui-Hasnaoui F.(Juin 2014). A heuristic approach for the infrared heating in thermoforming process. COSI'2014. Colloque sur l’Optimisation et les systèmes d’informations, Bejaïa, Algérie. COSI, Algeria.

Hamani* I., Erchiqui F. (Mai 2014). Study of the infrared heating step of a semi-transparent bio-composite material during thermoforming: Case of PET-hemp fibers. International Conference on Biobased Materials and Composites (ICBMC’14).

Fotso Talla *A. S, Erchiqui F., Kocaefe D., Kaddami H. (Mai 2014). Effect of hemp fiber on the properties of PET/hemp composites. International Conference on Biobased Materials and Composites (ICBMC’14), Montréal, Quebec, Canada

Tazi* M., Erchiqui F., Kaddami H., Bouazara M., Poaty B. (Mai 2014). Evaluation of mechanical properties and durability performance of HDPE-Wood composites. International Conference on Biobased Materials and Composites (ICBMC’14), Montréal, Quebec, Canada.

Bravo* A., Toubal L., Koffi D., Erchiqui F. (mai 2014). Effect of coupling agent on failure of polyethylene birch biocomposites-acoustic; International Conference on Biobased Materials and Composites (ICBMC’14), Montréal, Canada.

Tazi* M., Erchiqui F., Godard F. (juillet 2013). Effects of fibre load on the mechanical and thermophysical proprieties of wood-plastic composites. Proceedings of the Polymer Processing Society. 29 International conference of the polymer processing society (PPS-29), Nuremberg, Allemagne,

Koubaa A., Boubtane, Djedidi Z., Erchiqui F. (juin 2014). Dielectric Properties of Wood: Variations and Implications on Heating and Non-Destructive Testing. Second International Conference on Research to Applications & Markets, Sousse, Tunisie.

Fotso-Talla* S., Erchiqui F., Godard F. (Juillet 2013). Thermal properties and stability of PET-Hemp fibers composites. 19th International conference on composite materials (ICCM-19), Montréal, Québec, Canada

Mijiyawa* F., Koffi D., Erchiqui F., Kokta B. (juillet 2013). Beneficial effect of nanoclay and bacterial cellulose on wood plastics composites properties. Proceedings of the Polymer Processing Society. 29 International conference of the polymer processing society, Nuremberg, Allemagne. the polymer society, Allemagne

Bravo* A., Toubal L., Koffi D., Erchiqui F., Kokta. (juin 2013). Endommagement sous sollicitations monotone et cyclique d’un composite à matrice thermoplastique renforcée de fibres de bouleau suivi par émission acoustique. Proceeding. 18ème Journées nationales sur les composites, École centrale de Nantes, Nantes, France.

Mijiyawa *F., Koffi D., Kokta B., Erchiqui F., Toubal L. (juin 2013). Renforcement des thermoplastiques par les fibres de bois pour une application aux engrenages : prédiction du module élastique en traction. Proceeding. 18ème Journées nationales sur les composites, École centrale de Nantes, Nantes, France.

Bravo* A., Toubal L., Koffi D., Erchiqui F., Kokta B. V. (mai 2013). Damage characterization of thermoplastic matrix wood fiber composite using acoustic emission. 5th International Conference on NDT of HSNTIC MINDT-2013, Athens, Grèce

Tazi* M., Erchiqui F., Godard F. (avril 2013). Caractérisation des propriétés mécaniques et thermophysiques des biocomposites (HDPE-bois). Proceeding. 11ème Congrès de Mécanique, Agadir, Maroc.

Farid* H., Elghorba M., Erchiqui F., Chergui M, Elhad K. (avril 2013). Caractérisation de l’endommagement des plaques thermoplastiques minces en ABS sous sollicitation uniaxiale. Proceeding. 11ème Congrès de Mécanique, agadir, Maroc.

Soroush* H. A, Erchiqui F., Farzaneh M. (septembre 2012). Neural networks approach for characterization of nonisothermal thermoplastic membrane. Euromembrane, London, Royaume-Uni.,

Tazi* M., Erchiqui F., Godard F. (juin 2012). Non-Isothermal rheological characterization of wood composite with thermoforming application. Proceeding. 15th European Conference on Composite Materials, venise, Italie.

Bravo* A.; Toubala L.; Koffia D.; Erchiqui F.; Koktaa B. V. (juin 2012). Suivi acoustique du comportement et de l’endommagement d’un composite à matrice thermoplastique renforcée par des fibres de bouleau. Proceeding du 1er Symposium Synergie. 1er Symposium Synergie, Montréal, École de Technologie supérieur

Farid* H., El Ghorba M., Erchiqui F., Chergui M. (mai 2012). Caractérisation des membranes composites en grande déformations par un modèle neuronal. Proceeding. 7ème Congrès de l’association Franco-Magrébine de Mécanique et des Matériaux, Marrakech, Maroc.

Mijiyawa* F., Koffi D., Kokto B. V., Erchiqui F. (février 2012). Combined effects of mixing time, tixing rotation and coupling agent on mechanical properties of polypropylene/Aspen composites. Proceeding. International Conference on Bio-based Materials and Composites, Marrakech, Maroc.

Tazi* M., Erchiqui F., Bouazara M., Hilali E., Elminor H., Imad A. (février 2012). Compative Study of Rheology and Mechanical properties of Biocomposites plastic/Argan Tree. Proceeding. International Conference on Bio-based Materials and Composites, Marrakech, Maroc.

Hicham* F., Erchiqui F., Elghorba M. (février 2012). Behavior and damage of biocomposites membranes in great deformations, Proceeding. International Conference on Bio-based Materials and Composites, Marrakech, Maroc,

Mijiyawa* F., Koffi D., Kokto B. V., Erchiqui F. (février 2012). Effects of fibers, coupling agent and surface treatment on wettability and mechanical behavior of polypropylene/Aspen composites. Proceeding. International Conference on Bio-based Materials and Composites, Marrakech, Maroc,

Fotso Talla* A. S., Erchiqui F., Page J. S. Y. D. (février 2012). Influence of naturel fiber treatment on both the properties and thermal degradation of high melting thermoplastics reinforced with natural fibers: Case of PET-Hemp composite. Proceeding. International Conference on Bio-based Materials and Composites, Marrakech, Maroc.

Nahas* N. and Erchiqui F. (2011). Metaheuristic algorithms for optimization of infrared heating stage of the thermoforming. Proceedings of the Polymer Processing Society. International conference of the polymer processing society (PPS-27), Marrakech, Maroc.

Kaddami H., Erchiqui F., Raihane M., Lahcini M., Joffe R., Dufresne A. (octobre 2011). New Biodegradable Nanocomposite Based On Nanoparticule Of cellulose And Polyurethane. Proceeding. International Conference, On Intelligence Textiles and Mass Customization, Casablanca, Maroc.

Erchiqui F., Fotso-Talla * A., Pagé D., Bourihane A. (septembre 2011). Influence of The Choice of Additives in High Melting Polyesters (HMP) Reinforced With Natural Fibers (NF) in View of Structural Applications. Proceeding. 26th ASC Annual Technical Conference of the American Society of composites, Montréal.

Chaouki* H., Gakwaya A., Fafard M., Erchiqui F. (septembre 2011). An Orthotropic Hyperelastic Constitutive Law with Damage for Continuous Fibre Reinforced Thermoplastic Composites: Formulation, Numerical Simulations and Experimental Study. Proceeding. XI International Conference on Computational Plasticity Fundamentals and applications (COMPLAS XI), Barcelona, Espagne.

Slaoui Hasnaoui F.,Semaan G., Erchiqui F. (août 2011). Interpretation of Resistivity Sounding Data for Multi-Vertical Earth Model. IEEE. 21st International conference on system engineering, Las Vegas, (77-81).

Mijiyawa* F., Kokta B. V., Koffi D., Erchiqui F. (mai 2011). Reinforcement of polypropylene-wood fiber nanocomposite by bacteria cellulose: preliminary assessment of the manufacturing and performance. Proceedings of the Polymer Processing Society. International conference of the polymer processing society (PPS-27), Marrakech, Maroc.

Benhamou* K.; Kaddami H.; Erchiqui F., Raihane M.; Lahcini M.; Joffe R. (mai 2011). New biodegradale nanaocomposites based on nanoparticules of cellulose and polyurethane. Proceedings of the Polymer Processing Society. International conference of the polymer processing society (PPS-27), Marrakech, Maroc.

Tazi* M., Erchiqui F., Godard F., Kaddami H. (mai 2011). Effect of temperature and concentration of wood sawdust on the rheological properties of wood-plastic composite. Proceedings of the Polymer Processing Society. International conference of the polymer processing society (PPS-27), Marrakech, Maroc.

Erchiqui F.; Tazi* M.; Godard F. (mai 2011). Non-isothermal finite element analysis of free Inflation of flat membrane of HDPE charged by wood flours. International conference of the polymer processing society (PPS-27), Marrakech, Maroc.

Tazi* M, Erchiqui F., Godard F., Bourihane A. (avril 2011). Effet de la température sur les propriétés rhéologiques et physico-chimiques des composites plastique-bois. 10ème Congrès de mécanique, Oujda, Maroc.

Benhamou* K; Erchiqui F.; Dufresne A.; Saouaf N; Lahcin M.; Kaddami H. (février 2011). Étude comparative de matériaux nanocomposites élaborés à partir de nano-renforts cellulosiques extraits du palmier dattier et de polyuréthane à base de Polycaprolactone. Colloque International sur les Polymères Organiques et leurs Applications, Tanger, Maroc,

Migneaul* S., Koubaa A., Erchiqui F., Chaala A., Englund K., Wolcott M. P. (décembre 2010). Micromechanical modeling of the tensile strength of wood-polymercomposites. The Fifth International on Advances in Michanical and Michanics (ICAMEM 2010), Hammamet, Tunisie.

Chaouki* H., Gakwaya A,, Erchiqui F., Fafard M. (juillet 2010). A hyperelastic damage model for continuous fiber reinforced thermoplastic composites: formulation and numerical simulation. Proceedings of the Polymer Processing Society. 24th International conference of the polymer processing society (PPS-24), Banff, Canada.

Annasabi* Z., Erchiqui F., Koubaa. (mai 2010). Étude de chauffage de bois par des ondes électromagnétiques courtes. Proceeding. The International congress for applied mechanics, Marrakech, Maroc

Chaouki* H., A. Gakwaya. M. Fafard, F. Erchiqui. (septembre 2009). An orthotropic Hyperelastic damage model for reinforced thermoplastic composites: formulation and computational aspect. Proceedings of the American Society for composites. American Society for composites/24 Technical Conference, Newark, États-Unis. ASME

Chaouki* H., A. Gakwaya. M. Fafard, F. Erchiqui. (septembre 2009). Finite element simulation of a thermo-stamping process of a reinforced thermoplastic composite. Proceedings of the American Society for composites. American Society for composites/24 Technical Conference, Newark, États-Unis. ASME

Maniana* M., F. Erchiqui, A. Azim, H. Rhanim. (avril 2009). Fusion d’un bloc solide enaluminium dans un bain liquide du métal chaud. Proceeding. 9ème Congrès de mécanique, Société Marocaine des Sciences Mécaniques, Marrakech, Maroc

Hamani* I.; Erchiqui F.; Gakwaya A; Dituba-Ngoma G. (avril 2009). Modélisation simplifiée de chauffage infrarouge des membranes thermoplastiques semi-transparentes. Proceeding. 9ème Congrès de mécanique, Société Marocaine des Sciences Mécaniques, Marrakech, Maroc.

Migneault* S., Koubaa A., Erchiqui F., Chaala A., Englund K., Wolcott M.P. (juillet 2009). Application of micromechanical models tothe tensile properties of wood-plastic composites. Proceedings of the Polymer Processing Society. Polymer processing Society, Larnaca, Chypre.

Migneault* S., A. Koubaa, Erchiqui F., A. Chalaa, K. Englund, M. Wolcott. (juillet 2008). Effects of Processing Method and Fiber Characteristics on Structure and Properties of Wood Plastic Composites.9th international conference on Flow Processes in composite Materials, Montréal, Canada

Erchiqui F., Godard F., Koubaa A. (juin 2008). Numerical investigation of potentiality of thermoformability of HDPE charged by wood floors. PPS-24, Polymer processing Society Salerno, Italie.

Ngoma G. D., Amsini S., Erchiqui F. (juin 2008). Transient analysis of a liquid flow in microchannel of varying cross-section. 6th International Conference on Nanochannels, Microchannels, and Minichannels. ASME 2008, 6th International Conference on Nanochannels, Microchannels, and Minichannels, Darmstadt, Allemagne

Koubaa A., Migneault* S., Soucy* J., Erchiqui F. (juin 2008). Properties of Extruded Wood Plastic Composites Made from Pulp Fibers.PPS-24, Polymer processing Society, Salerno, Italie

Erchiqui F. (août 2007). Modélisation intégrée par la MEF du thermoformage d’une pièce polymérique de type PET : Effet d’un formage incomplet. 18ème Congrès Français de Mécanique, Grenoble, France.

Erchiqui F.; Souli M.; A. Alia*. (août 2007). Modélisation de l’effet d’un gaz réel sur le soufflage libre d’une structure viscoélastique. CD-ROM proceeding. 18ème Congrès Français de Mécanique, Grenoble, France.

Dituba-Ngoma G.; Erchiqui F. (mai 2007). Parameter Study of Liquid Flow and Heat Transfer in a Microchannel of Varying Cross-Section. CD-ROM proceeding. IASTED Symposium Applied Mathematics and Numerical Methods, Montréal, Canada.

Dituba-Ngoma G.; Sadiki A.; Erchiqui F. (mai 2007). Time-Dependent Liquid Flow and Thermal Characteristics in a Trapezoidal Microchannel. CD-ROM proceeding. IASTED, Applied Simulation and Modelling, Palma De Mallorca, Espagne.

Chaouki* H.; Erchiqui F.; Gakwaya A.; Fafard M. (mai 2007). A new constituve law for the viscoelastic mediums reinforced by long or continuous fibres at large deformations. CD-ROM proceeding. PPS-23, Polymer processing Society, Salvador, Brésil.

Chaouki* H., Erchiqui F., A. Gakwaya M. Fafard. (avril 2007). Nouvelle loi decomportement pour les milieux viscoélastiques renforcés par des fibrescontinues. Volume 1. 8ème Congrès de mécanique, El Jadida, Maroc

Erchiqui F. (avril 2007). Modélisation expérimentale et numérique de l’effet d’une charge de gaz réel de type Redlich-Kwong sur le comportement de membranes viscoélastique dans le procédé de thermoformage. Volume 2. 8ème Congrès de mécanique, El Jadida, Maroc

Makrizi A.; Radi B.; Erchiqui F. (avril 2007). Parallélisation de l’optimisation topologique d’une structure élastique. Volume 1. 8ème Congrès Marocain de mécanique, El Jadida, Maroc.

Erchiqui F., Radi B., Bagaoui R. (avril 2007). Caractérisation etmodélisation du comportement viscoélastique d’une membrane sous l’action d’unecharge de gaz réel de type Van Deer Waals. Volume 1. 8ème Congrès de mécanique, El Jadida, Maroc

Hamani* I., Erchiqui F., Rhanim H., Azim A. (avril 2007). Modélisation du chauffage infrarouge des membranesthermoplastiques semi-transparentes de type PET par la MEF-3D. Volume 2. 8ème Congrès de mécanique, El Jadida, Maroc

Migneault S., A. Koubaa, Erchiqui F., A. Chaala, K. Englund and M.P. Wolcott. (mars 2007). Effect of fiber length on processing andproperties of wood-plastic composites. 3eme Symposium International sur les Composites Bois Polymères, Bordeaux, France

Erchiqui F.; Dituba-Ngoma G.; Mouloudi* A., Kandil N. (2006). Networks Approach for Characterization of Viscoelastic Polymers. CD-ROM proceedings. Annual Meeting of Polymer Processing Society (PPS-22), Yamagata, Japon. Polymer Processing society

Soucy* J., A. Koubaa, M. Wolcott, K. Englund, and Erchiqui F. (2006). Rheometer Torque properties of Thermoplastic Composites filled withdifferent Pulp Fibers.Proceedings of the Polymer Processing Society. 22 Annual Meeting of Polymer Processing Society (PPS-22), Yamagata, Japon. Polymer Processing society

Erchiqui F.; Gakwaya A.; Souli M. (septembre 2006). Non-isothermal Finite Element Analysis of Thermoforming of PolyethyleneTerephthalate Sheet. CD-ROM proceeding. Polymer processing Society, Europe/Africa Meeting, Pretoria, Afrique du Sud.

Dituba N. G, Erchiqui F. (mai 2006). Liquid slip and thermal effects on electroosmotic and pressure driven flow in a microchannel. IASTED-Book. The International Association of Science and Technology for Development (IASTED), Montréal, Canada

Erchiqui F. (novembre 2005). No isothermal Hybrid approach using the perfect gas law and explicit dynamic finite element method for the simulation of thermoforming and blow molding processes. ASME 2005 International Mechanical Engineering Congress and Exposition. Orlando, Floride, USA

Erchiqui F.; Bendada A.; Godard F. (mai 2005). Thermodynamical approach for modeling of free inflation of the closed thin hyperelastic structure.16th IASTED Conference of the International Association of Science and Technology for Development, Cancun, Mexique.

Erchiqui F., A. Gakwaya. (September 2005). Analyse of gas temperature effect during the K-BKZ polymer membrane inflation. CD-ROM proceeding. Polymer Processing Society, America’s Regional Meeting, Québec, Canada.

Dituba N. G., Erchiqui F. (mai 2005). Effect of transient heat load on flow distribution. IASTED-Book. 16th IASTED Conference of the International Association of Science and Technology for Development, Cancun, Mexique.

Erchiqui F., N. G. Dituba, A. Bendada. (mai 2005). Modélisation non isotherme du comportement viscoélastique de membranes dans le procédé de thermoformage. CD-ROM proceeding. 7ème Congrès en mécanique de la Société Marocaine des Sciences Mécaniques, Casablanca, Maroc.

Erchiqui F.; Benharbit* M.; N. Kandil. (mai 2005). Caractérisation des membranes thermoplastiques par application de l’approche neuronale de type Back-Propagation et de la méthode des différences finies. CD-ROM proceeding. 7ème Congrès mécanique de la Société Marocaine des Sciences Mécaniques, Casablanca, Maroc.

Nourelfath M.; Erchiqui F. (mai 2004). Optimization of Transfer Lines in Plastic. ANTEC’2004-Society of Plastics Engineering (SPE), Chicago, USA

Erchiqui F., N. Kandil. (mai 2004). Neuronal Networks Application for Characterization of Softened Polymers. Volume 1. ANTEC 2004-Society of Plastics Engineering (SPE), Chicago, USA

Erchiqui F., A. Gakwaya. (juillet 2004). A 3Dvariational BEM formulation for fluid-structure interaction in viscous compressible flow. ASME, The 8th International Symposium on Emerging Technology in Fluids, Structures, and Fluid-Structure Interactions, San Diego, California, USA.

Erchiqui F.; Bendada A.; Gakwaya A.; Kandil N. (juin 2004). Dynamic finite element analysis of the forming process in long fiber reinforced hyperelastic materials. Materials Processing and Design: Modeling, Simulation and Applications. 8th International Conference on Numerical Methods in Industrial Forming Processes, Ohio, Columbus, USA

Erchiqui F.; Gakwaya A. (juin 2003). Modélisation es interactions fluide-structure par une approche combinant les équations intégrales et la méthode des éléments finis. CD-ROM proceeding. 31 Annual conferences of Canadian Society for Civil Engineering, Moncton (New-Brunswick), Canada.

Erchiqui F., A. Gakwaya, M. Rachik,. (septembre 2003). Analysisof gaz pressure effect during the KBK-Z polymer membrane forming using the dynamite finite element method. CD-ROM proceedings. PPS-2003 Europe/ Africa Regional Meeting, The Polymer Processing Society, Athens, Grèce.

Erchiqui F.; Gakwaya A (mai 2003). A Symetric variational boundary element formulation for structure interaction problems. La conférence européenne sur les nouvelles avancées en calcul des structures, Giens, France ,

Erchiqui F. (avril 2003). Modélisation du Comportement des polymères de typeKBK-Z dans les procédés de fabrication des pièces creuses minces. Tome I. 6ème Colloque la société marocaine de la mécanique, Tanger, Maroc.

Erchiqui F., Derdouri A., Garcia-Réjon A. (mai 002). Numerical and experimental analysis of the material behavior during a bubble inflation test. CD-ROM proceeding-Vol. 1. ANTEC’2002-Society of Plastics Engineering (SPE), San Francisco, USA

Erchiqui F., Garcia-Réjon A., Derdouri A. (mai 2001). Modeling of parison formation in Blow Moulding. CDROM proceedings. PPS-17-Polymer Processing Society, America’s Regional Meeting, Montréal, Canada.

Derdouri A., Erchiqui F., A. Bendada, E. Verron, B. Peseux. (août 2000). Viscoelastic behaviour of polymer membranes under inflation. Volume 3. Rheology’2000-XIII International Congress on Rheology, Cambridge, (394-396).

Derdouri A.; Erchiqui F.; Garcia-Réjon A. (septembre 1998). Non-linear behaviour of polymeric materials under biaxial deformation. Proceeding of Canadian Chemical Engineering Conference. 48th Canadian Chemical Engineering Conference, Toronto Ontario, Canada

Erchiqui F.; Derdouri A.; Laroche D (août 1998). Biaxial Characterization of Softened Polymers. Proceedings of the Polymer Processing Society. PPS-14-The polymer Processing Society, Toronto, Ontario, Canada

Laroche D.; Erchiqui F. (juin 1998). 3D Modelling of the Blow moulding Process. Numerical Methods in Industrial Forming Processes, NUMIFORM’98, Enschede, Irlande

Laroche D; Erchiqui F. (avril 1998). Experimental and theoretical study of the thermoformability of industrial polymers. Proceedings of the Polymer Processing Society. SPE- ANTEC’1998, Atlanta, Georgia, USA

Erchiqui F.; Gakwaya A. (avril 1995). FEM-BEM formulation for fluid-structure interaction. Mécanique des solides, Volume 2. 2ème Congrès de la société marocaine de mécanique, Casablanca, Maroc.

Erchiqui F.; Gakwaya A (août 1991). Avriational symmetric boundary element formulation for fluid-structure interaction problems. Proceeding of Boundary element methods in Engineering. 13th International Conference on Boundary element methods in Engineering- BEM 13, Tulsa (Oklahoma).

Charette A.; Erchiqui F.; Kocaefe Y. S. (mai 1987). The imaginary planes method for the radiative heat transfer analysis in furnaces. Proceeding of Canadian Society for Chemical Engineering. Canadian Chemical Engineering Conference, Montréal, Québec, Canada

Laroche D.; A. Charette; Erchiqui F.; Kocaefe Y.S ( mai 1986). Modèle en deux dimensions pour le calcul simplifié du rayonnement dans les fournaises industrielles. Proceeding of Canadian Conference on Industrial Computer Systems. Canadian Conference on Industrial Computer Systems, Montréal, (478- 483),

Résumés publiés avec comité de lecture

Farid* R.; Erchiqui F. (mai 2017). Valorisation des fibres végétales pour la fabrication de pales de rotors d’éoliennes par thermoformage. ACFAS (Association francophone pour le savoir), Montréal, Canada

Fotso-Talla* A. S.; Erchiqui F. (mai 2017). Étude sur l'aptitude des Biocomposites à base de de Polyéthylène Téréphtalate (PET) et de fibres de chanvre Industriel (Cannabis Sativa L.) pour des applications en génie de construction. ACFAS (Association francophone pour le savoir), Montréal, Canada.

Hamani* I.; Erchiqui F.; Dituba-Ngoma G. (mai 2017). Influence du rayonnement infrarouge sur le chauffage des composites plastique-chanvre en thermoformage. ACFAS (Association francophone pour le savoir), Montréal, Canada.

Hamdani* O.; Erchiqui F.; Slaoui-Hasnaoui F. (mai 2017). Investigation sur l'utilisation des microondes pour le chauffage des composites bois-plastique. ACFAS (Association francophone pour le savoir), Montréal, Canada.

Erchiqui F. (2017). Stratégie de valorisation des résidus industriels solides comme renfort dans les produits de plastique. ACFAS (Association francophone pour le savoir), Montréal, Canada, Date de la conférence: 2017/5

Baatti* A.; Hajjajib M.; Allaguib A.; Erchiqui F. (mai 2017). Valorisation de l’Argile et le Chitosane dans le traitement des eaux polluées par des Chromates (VI). ACFAS (Association francophone pour le savoir), Montréal, Canada.

Hamani* I.; Erchiqui F.; Dituba-Ngoma G. (mai 2017). Caractérisation de la diffusivité thermique des composites bois-plastique par la méthode flash-Laser et modélisation de l’étape de chauffage de ces matériaux en thermoformage.ACFAS (Association francophone pour le savoir), Montréal, Canada.

Tazi* M.; Erchiqui F.; Yousfi R. (mai 2017). Biodégradabilité et propriétés physiques des composites boisplastique: cas de HDPE-Sciures de bois. ACFAS (Association francophone pour le savoir), Montréal, Canada.

Diagne* M.; Erchiqui F.; Hasnaoui-Slaoui F. (mai 2017). Investigation sur l'utilisation des radiofréquences pour le chauffage des biocomposites: cas du bois. ACFAS (Association francophone pour le savoir), Montréal, Canada.

Ben Aoun* N.; Erchiqui F. (mai 2017). Investigation sur l'utilisation des composites bois-plastique dans le secteur des chaises. ACFAS (Association francophone pour le savoir), Montréal, Canada

Tazi* M.; Erchiqui F. (mai 2017). Étude expérimentale et numérique sur la valorisation des sciures du bois dans des produits composites en plasturgie: cas de thermoformage. ACFAS (Association francophone pour le savoir), Montréal, Canada

Toubal L.; Koffi D.; Erchiqui F. (2017). Des écocomposites thermoplastique-fibre naturelle pour des éléments de machine : cas des engrenages. ACFAS (Association francophone pour le savoir), Montréal, Canada.

Sukiman* S. M.; Kanit T.; Imad A.; Erchiqui F. (mai 2017). Valorisation des sciures de bois pour la fabrication de coffrage pour la construction. ACFAS (Association francophone pour le savoir), Montréal, Canada.

Baatti* A.; Erchiqui F.; Bébin P.; Godard F.; Bussière D. (2017). Valorisation de la Cellulose Nanocristalline comme nanorenfort des polymères. ACFAS (Association francophone pour le savoir), Montréal, Canada.

Hamani* I.; Erchiqui F.; Slaoui-Hasnaoui F. (mai 2013). Investigation sur la modélisation de transfert de chaleur par rayonnement infrarouge dans les bio-composites thermoplastiques. 81ième Congrès de l’ACFAS, Québec, Canada.

Hicham* F.; Erchiqui F. (mai 2013). Caractérisation de l’endommagement des plaques thermoplastiques minces en ABS sous sollicitation uniaxiale. 81ième Congrès de l’ACFAS, Québec, Canada.

Fotso-Talla* A. S.; Erchiqui F.; Kokaefe D.; Godard F. (mai 2013). Élaboration et caractérisation des propriétés thermophysiques des composites PET-fibres de chanvre. 81ème Congrès de l'Acfas, Québec, Canada.

Erchiqui F.(2013). Élaboration, caractérisation et modélisation du comportement des bio-composites en thermoformage. 81ième Congrès de l’ACFAS, Québec, Canada.

Tazi* M., Erchiqui F., Godard F., Bouazara M. (mai 2013). Caractérisation des propriétés mécaniques et thermo-physiques des biocomposites (PEHD et sciures de bois). 81ième Congrès de l’ACFAS, Québec, Canada.

Mijiyawa* F.; Koffi D., Erchiqui F.; Kokta B. V. (mai 2013). Étude de l’effet des fibres sur les propriétés en traction, la mouillabilité et la dégradation thermique du composite polyéthylène-bois. 81ième Congrès de l’ACFAS, Québec, Canada.

Bravo* A.; Toubal L.; Koffi D.; Erchiqui F. (mai 2013). Utilisation de l’intelligence artificielle pour caractériser les mécanismes d’endommagement d’un biocomposite. 81ième Congrès de l’ACFAS, Québec, Canada.

Farid* H.; Erchiqui F., Ezzaidi H.; Slaoui-hasnaoui F. (mai 2013). Analyse expérimentale et numérique en soufflage libre d'une membrane bio-composite thermoplastique. 81ième Congrès de l’ACFAS, Québec, Canada.

Hanzouli* A., Koubaa A., Erchiqui F. (mai 2012). Évaluation du potentiel des micro-ondes pour le traitement phytosanitaire du bois. 80ième Congrès de l’ACFAS, Montréal, Canada.

Bravo* A., Koffi D., Toubal L., Erchiqui F. (mai 2012). Vers une nouvelle approche dans l’analyse de l’endommagement d’engrenage en plastique et composite. 80ième Congrès de l’ACFAS, Montréal, Canada.

Mijiyawa* F.; Habibi M.; Koffi D.; Toubal L., Kokta B. V.; Erchiqui F. (mai 2012). Étude comparatif despropriétés mécaniques en traction des composites à matrice polypropylène renforcée par des fibres de bois (bouleau et/ou tremble. 80ième Congrès de l’ACFAS, Montréal, Canada.

84. Tazi* M, Erchiqui F., Godard F. (mai 2011). Effet de la température sur les propriétés rhéologiques et physico-chimiques des composites plastique-bois. 79ème Congrès de l’ACFAS, Sherbrooke, Canada.

Hamani* I, Erchiqui F, Slaoui Hasnaoui F. (mai 2011). Caractérisation et modélisation axisymétrique non isotherme de transfertde chaleur dans les bio-composites thermoplastiques. 79ème Congrès de l’ACFAS, Sherbrooke, Canada.

Hamani* I., F. Erchiqui, G.D. Ngoma. (mai 2010). Modèle hybride pour l’analyse de chauffage infrarouge des membranes thermoplastiques semi-transparente. 78ème Congrès de l’ACFAS, Montréal, Canada.

El Bahri* F. Z.; Erchiqui F.; Bendada H; Bourihane A. (mai 2010). Problème inverse d'identification de la diffusivité thermique des bio-composites thermoplastiques par la méthode de Flash. ACFAS. 78ème Congrès de l’ACFAS, Montréal, Canada.

Annasabi* Z, Erchiqui F., Koubaa A. (mai 2010). Modélisation par élémentsfinis de chauffage de bois par des ondes électromagnétiques courtes. 78ème Congrès de l’ACFAS, Montréal, Canada.

Chaouki* H., F. Erchiqui, A. Gakwaya, M. Fafard. (mai 2009). Simulation par élément finis de la mise en forme d’un composite thermoplastique à fibres continues. 77ème Congrès de l’ACFAS, Ottawa (Ontario), Canada.

Migneault* S., A. Koubaa, F. Erchiqui, A. Chaala, K. England et M. Wolcott. (mai 2007). Implications de la morphologie de la fibre et du procédé de mise en forme sur les propriétés des composites bois-plastique destinés à la fabrication des meubles. 75ème Congrès de l’ACFAS, Trois-Rivières, Canada. ACFAS, Canada.

Hamani* I, Erchiqui F., Dituba G. D. (mai 2006). Analyse numérique de l’étape de chauffage d’une feuille thermoplastique mince en PET. 74ème Congrès de l’ACFAS, ACFAS.

Soucy* J., A. Koubaa, Erchiqui F. (mai 2006). Effets de la nature des fibres sur leur comportement viscoélastique dansun polymère thermoplastique et sur les propriétés du composite résultant. 74ème Congrès de l’ACFAS, Montréal, Canada.

Benharbit* M., Erchiqui F., Kaddimi H., Kandil N. (mai 2006). Application des réseaux de neurones pour le problème inversed’identification du comportement de membranes thermoplastiques en HIPS et en ABS. ACFAS. 74ème Congrès de l’ACFAS, Montréal, Canada.

Chapitres de livre

Erchiqui F.; Nahas N.(2018). Application of simulated annealing algorithm to thermoforming process. Simulated Annealing: Introduction, Applications and Theory. Article soumis, Nova Science Publishers, New York, États-Unis,

Fotso Talla* A. S., Erchiqui F.(2017). Poly (ethylene-terephthalate) Reinforced with Hemp Fibers: Elaboration, Characterization and Applications. Handbook of Composites from Renewable Materials. : 43-66.Article sous presse, WILEY-Scrivener Publishe (Vijay Kumar Thakur),

Erchiqui F, Tazi* M, Imad A., Kanit T.(2016). Influence of Soft Woods Contents on the Biodegradability and Thermoformability of HDPE Composite Structures for Thermoforming Application. Advances in Materials Science Research. Materials Science and Technologies(24): 71-102. Article publié, Nova Science Publishers, New York, États-Unis

Erchiqui F.(2010). Analysis of Nonlinear Isotropic Hyper-elastic and Viscoelastic Materials for Thermoforming Applications. Finite Element Analysis. Sciyo: 315-333. Article publié, David Moratal,

Erchiqui F., Gakwaya A. (1991). A Variational Symmetric Boundary Element Formulation for Fluid-structure interaction Problems. Boundary Elements. Springer(XIII): 219-231. Article publié, C. A. Brebbia, G. S. Gipson,